Introduction and characteristics of sanitary Y-type filter

The stainless steel Y-type filter is a small device that removes a small amount of solid particles in the liquid, which can protect the normal operation of the equipment. When the fluid enters the filter cartridge with a certain size filter screen, its impurities are blocked, and the clean filtrate is filtered by the filter. The outlet is discharged. When cleaning is required, the detachable filter cartridge can be taken out and reloaded after processing. Therefore, it is extremely convenient to use and maintain.

1. Air filter Make the polluted air clean to the state required for production and life, that is, to make the air reach a certain degree of cleanliness.

2. Liquid filter The contaminated liquid can be cleaned to the state required for production and life, that is, to make the liquid reach a certain degree of cleanliness.

3. Network filter Block the spam information by setting, so that the information appearing on the computer screen meets the requirements as much as possible. The principle of same absorption separates light of different colors

4. Light filter to absorb some unwanted light. The above should be a mesh filter. In fact, there are many kinds of filters, such as laminated filters, sand filters, carbon filters, etc. The main principle is to use the pore size of the filter medium to intercept substances smaller than the pore size of the medium. Of course, some filter media also have special effects such as adsorption. Most of the filters are not so troublesome to backwash, as long as clean water is introduced from one end of the filtered water to the medium in the backwash filter, a good backwashing effect can be achieved.